KitchenAid Genuine Pack of 2 : Fast delivery

Arrived really quickly and well packaged. It’s good to get the special tool and for some people using this and following the instructions may be enough, but i think on my machine the clutch was very tightly threaded on, so despite following the instructions the old broken clutch showed no sign of coming off. I followed the advice and watched youtube videos. Most of them just tell you to do it the same way as the instructions, and i guess this method does usually work, but if you find that it won’t budge this way, youtube the tutorial by “the practical supermom” as she has a different approach that loosens the over-tight thread with a hammer and philips screwdriver (not as violent as that sounds). No damage done to the machine, and it was an easy job once i took that approach. Very pleased now, great that you can find this part so easily and extend the life of your machine.

The data sheet for removal of old clutch is wrong.

Excellent service, exactly as described, arrived really quick – thanks.

Easy to fix espically after watchimg youtube films.

Goods as described, prompt servicw.

My kitchen aid blender is good as new.

Easy to make repair with these.

  • Genuine part but manufacturer instructions poor. See my suggestions.
  • Very easy to fit and my blender works perfectly
  • Five Stars

Genuine Pack of 2, Rubber Clutch Couplers 9704230. Spanner Included. Fits Models Starting 5KSB3, KSB3, KSB5, 5KSB52 And 5KSB5

Genuine Pack of 2, Rubber Clutch Couplers WP9704230. Spanner Included. Compatible With Kitchenaid Models Starting 5KSB3, KSB3, KSB5, 5KSB52 And 5KSB5. Genuine Factory Spare Parts. Comes With A Spindle Locking Spanner, Which Fits Onto The Spindle Underneath The Coupler. Backed By LKS Technical Service And Support Team

Buy on Amazon

Did the job, very simple to fit.

Easy to fix my beloved kitchen aid blender.

I ordered them and they arrived by post on day 2 in good condition and with clear instructions on how to fit one and i have the 2nd as a permanent spare (and were cheaper by the pair) i can recommend lana’s spares service 100%.

The spanner tool was particularly useful.

Same problems as previous ones. Tends to snap teeth but no alternative.

The clutch couplers came off my blender (my fault). These spares saved me lots of money as i originally thought i would have to buy a new blender. Very easy to fit and my blender works perfectly.

Instructions (by manufacturer) a bit rubbish. In the instructions it suggests prising existing coupler off – effectively tearing off existing coupler threads. Given this comes with the tool that holds the drive shaft it is way easier to use tool to hold shaft – i. Stop it rotating and then rotate the coupling to unscrew. Note that this is a left hand thread and coupling is turned clockwise to undo it. If it’s tight, turn coupling using a pair of big grips. This method avoids any damage to drive shaft or casing. Fitting new one is the reverse but tighten new one anti-clockwise. Again use the tool to hold the shaft and finger tighten. No need to use grips to tighten new coupling just with fingers.

The fitting instructions tell you to use a screwdriver to lever off the old clutch but if you did this it would strip the threads from the drive shaft which could prove very costly.

  • Genuine part but manufacturer instructions poor. See my suggestions.
  • Very easy to fit and my blender works perfectly
  • Five Stars

Genuine Pack of 2, Rubber Clutch Couplers 9704230. Spanner Included. Fits Models Starting 5KSB3, KSB3, KSB5, 5KSB52 And 5KSB5

Now have a working liquidiser.

Work perfectly to replace worn coupler. Some people are saying that the metal tool doesn’t work, but it just holds the coupler mechanism still while you unscrew the rubber coupler, rather than being a wrench. It is a much better way to change it than some of the videos i have seen on youtube where they mangle it with a screwdriver.

Very good and fast service , will use again.

Features and Spesification

  • Genuine Pack of 2, Rubber Clutch Couplers WP9704230. Spanner Included.
  • Compatible With Kitchenaid Models Starting 5KSB3, KSB3, KSB5, 5KSB52 And 5KSB5.
  • Genuine Factory Spare Parts.
  • Comes With A Spindle Locking Spanner, Which Fits Onto The Spindle Underneath The Coupler.
  • Backed By LKS Technical Service And Support Team