TESmart HDMI Matrix 4×4 HDMI Switcher 3D Full HD 1080P [email protected] 4 Input 4 Outputs HDMI Splitter LED DVI Power Off Memory IR Remote Control Incompatible – Works perfectly, exactly as it should. Very pleased.

Easy to set up, easy to use even for someone as poor with technology as me. We have a pub so this is perfect for our tvs and being able to split over sky and bt. Only criticism is if all 4 outputs are on 1 input it can cut in and out. But for spreading the tvs over all 4 inputs it’s perfect.

It does exactly what it should. It was bought to replace an aging switch and so far has worked exemplary.

This is a true matrix and one of the cheapest i’ve found. You can send any input to any output. I have runs of 40m using active hdmi with optional extra power but this provides enough power. I ordered 2 and one was faulty (wouldn’t switch channels) but the replacement was fine. Once you switch it on, don’t panic if there’s not an instant picture. Check the mappings and give it 20-30s to boot up.

This is the best hdmi switch i’ve ever bought, it works flawlessly everytime. I’ve not even started to exploit the rs232 interface yet. Will be looking to replace several other devices with their products. No issues with switching any input to any output or multiple outputs, totally a matrix.

The box works well and reliably and has made it much easier for me to work with two computers. All combinations of input/output without issues. At the price happy overall as picture quality is good but would have been good to have all 4 outputs available as it is sold as a 4×4 matrix.

Great works very well in our sports bar.

Works great once you figure out how to use.

Easy to install no bother ran 1st go.

Set up the ip control no problem but this will require some basic networking knowledge and may be more difficult for the amateur if you require this feature. Otherwise it operates easily from the remote or the buttons on the front. Hopefully it stands the test of time.

Here are the specifications for the TESmart HDMI Matrix 4×4 HDMI Switcher 3D Full HD 1080P [email protected] 4 Input 4 Outputs HDMI Splitter LED DVI Power Off Memory IR Remote Control Incompatible:

  • Make sure this fits
    by entering your model number.
  • Supports [email protected] 3D and [email protected] compatible with HDCP protocol.
  • Supports PCM, Dolby AC3, DTS5.1, DTS7.1 and DSD audio format.Each HDMI output can select same input or select standalone input.mart EDID management, make it compatible with most display devices.
  • Matrix status could be memorized after power down, automatically restore previous matrix status after next power on.
  • Easy control matrix via IR receiver, front keypad and PC (via RS232 port). Easy to view real time inputs and outputs status via LED display.
  • Supports DVI-D single link sources and displays with the use of HDMI-to-DVI adapters.8KV ESD protection.

Reviews from purchasers :

  • Great value HDMI matrix
  • Super simple
  • This is the HDMI switch solution